Weller Mg 130: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Weller MG 130 Information

The Weller MG 130 is a fume extraction unit that is designed to purify the air in a work area up to 2 workstations. It has a 100-240 V power supply, making it suitable for use in all countries. The MG 130 has a compact design with a small footprint, making it easy to store and transport. It also features a filter alarm and 3-step speed control.

Here is an overview of the Weller MG 130's specifications:

Feature	Specification
Power supply	100-240 V
Maximum airflow rate	2300 Pa
Filter type	H13 particle filter + activated carbon filter
ESD safe	Yes
Dimensions (L x W x H)	460 x 210 x 500 mm
Weight	4.5 kg

Features

• 100-240 V power supply for worldwide use
• Compact design with small footprint
• Filter alarm
• 3-step speed control
• ESD safe
• H13 particle filter + activated carbon filter

What's in the box

• Weller MG 130 fume extraction unit
• 2 flexible hoses (1 m each)
• 2 funnel nozzles (225 x 100 mm)
• Instruction manual

The Weller MG 130 is a great option for anyone who needs to purify the air in a work area where solder fumes are present. It is easy to use and maintain, and it has a number of features that make it a safe and effective choice.

Here are some of the benefits of using the Weller MG 130:

• It can help to protect your health by removing harmful solder fumes from the air.
• It can help to improve the quality of your work by reducing the amount of smoke and fumes that obscure your vision.
• It can create a more comfortable and inviting work environment.
• It can help to comply with workplace safety regulations.

If you are looking for a fume extraction unit that can help to improve the quality of your work and protect your health, the Weller MG 130 is a great option to consider.

Weller MG 130 Compare with Similar Item

a table comparing the Weller MG130 to some similar fume extraction units:

Feature	Weller MG130	Hakko FR-301	Metcal MS-200
Power	130 watts	120 watts	100 watts
Airflow rate	150 CFM	120 CFM	100 CFM
Noise level	58 dBA	55 dBA	50 dBA
Weight	5.5 pounds	4.4 pounds	4.2 pounds
Dimensions	12 x 8 x 10 inches	11 x 7 x 8 inches	10 x 6 x 7 inches
Price	$129.99	$119.99	$99.99

As you can see, the Weller MG130 is a slightly more powerful fume extraction unit than the Hakko FR-301 and Metcal MS-200. It also has a slightly higher airflow rate and noise level. However, it is also slightly larger and heavier than the other two units.

Ultimately, the best fume extraction unit for you will depend on your individual needs and preferences. If you need a powerful unit with a high airflow rate, the Weller MG130 is a good option. However, if you are looking for a more compact and quiet unit, the Hakko FR-301 or Metcal MS-200 may be a better choice.

Here are some additional factors to consider when choosing a fume extraction unit:

• The type of work you will be doing. If you will be working with lead solder, you will need a unit that is specifically designed for lead fume extraction.
• The size of your work area. If you have a large work area, you will need a unit with a larger airflow rate.
• The noise level. If you will be working in a quiet environment, you will need a unit with a low noise level.
• The price. Fume extraction units can range in price from around $100 to $300 or more.

I hope this information is helpful!

Weller MG 130 Pros/Cons and My Thought

The Weller MG 130 is a high-quality soldering iron that offers a number of pros and cons. Some of the pros of the Weller MG 130 include:

• Powerful: The Weller MG 130 has a maximum output of 130 watts, which makes it ideal for soldering large or complex components.
• Durable: The Weller MG 130 is made from high-quality materials and is built to last.
• Ergonomic: The Weller MG 130 has a comfortable grip and is easy to use for long periods of time.
• Versatile: The Weller MG 130 can be used with a variety of soldering tips, making it a versatile tool for a variety of projects.

Some of the cons of the Weller MG 130 include:

• Pricey: The Weller MG 130 is more expensive than some other soldering irons on the market.
• Heavy: The Weller MG 130 is relatively heavy, which can make it tiring to use for long periods of time.
• Not cordless: The Weller MG 130 is a corded soldering iron, which can be limiting in some situations.

Here are some user reviews of the Weller MG 130:

• Positive review: "I've been using the Weller MG 130 for a few months now and I'm really impressed with it. It's powerful, durable, and easy to use. I would definitely recommend it to anyone looking for a high-quality soldering iron." - John Smith
• Negative review: "I was disappointed with the Weller MG 130. It's not as powerful as I thought it would be and it's a bit heavy. I would have preferred a cordless model." - Jane Doe

My thoughts on the Weller MG 130 are that it's a great soldering iron for the price. It's powerful, durable, and easy to use. However, it is a bit heavy and not cordless. If you're looking for a high-quality soldering iron that doesn't break the bank, the Weller MG 130 is a great option. But if you're looking for a cordless soldering iron or a lighter option, you may want to look elsewhere.

Overall, the Weller MG 130 is a great soldering iron that offers a good balance of features and price. It's powerful, durable, and easy to use. However, it is a bit heavy and not cordless. If you're looking for a high-quality soldering iron that doesn't break the bank, the Weller MG 130 is a great option. But if you're looking for a cordless soldering iron or a lighter option, you may want to look elsewhere.

Weller MG 130 Where To Buy

Here are some places where you can buy the Weller MG 130 soldering iron and spare parts:

• Weller direct: The Weller website sells the MG 130 soldering iron and a variety of spare parts, including tips, cleaning wires, and replacement power cords.
• Walmart: Walmart sells the Weller MG 130 soldering iron for a slightly lower price than Weller direct. They also carry a limited selection of spare parts.
• Amazon: Amazon is another good option for buying the Weller MG 130 soldering iron. They have a wide selection of spare parts available, and often have competitive prices.
• Best Buy: Best Buy also sells the Weller MG 130 soldering iron. They have a limited selection of spare parts available, but their prices are generally competitive.
• Lowes: Lowes sells the Weller MG 130 soldering iron, but they do not carry any spare parts.
• eBay: eBay is a good option if you are looking for a specific spare part for the Weller MG 130 soldering iron. You can often find used or NOS (new old stock) parts on eBay for a fraction of the cost of new parts.

If you are not sure where to buy the Weller MG 130 soldering iron or spare parts, I recommend starting with the Weller website. They have a wide selection of products available, and their prices are generally competitive. You can also check with your local electronics store to see if they carry Weller products.

Weller MG 130 Problems and Solutions

some common problems and solutions for the Weller MG 130 soldering iron, as reported by experts:

• The iron won't heat up.
  • Make sure that the iron is plugged in and turned on.
  • Check the power cord for any damage.
  • Clean the tip of the iron with a damp sponge or cloth.
  • If the iron still won't heat up, contact Weller customer support for assistance.
• The iron is not getting hot enough.
  • Make sure that the iron is set to the correct temperature.
  • Check the power cord for any damage.
  • Clean the tip of the iron with a damp sponge or cloth.
  • If the iron is still not getting hot enough, contact Weller customer support for assistance.
• The iron is overheating.
  • Turn down the temperature setting on the iron.
  • Allow the iron to cool down before using it again.
  • If the iron continues to overheat, contact Weller customer support for assistance.
• The iron is making a clicking noise.
  • This is usually caused by a dirty tip. Clean the tip of the iron with a damp sponge or cloth.
  • If the clicking noise persists, contact Weller customer support for assistance.
• The iron is smoking.
  • This is usually caused by using the iron on a dirty surface. Clean the surface before using the iron.
  • If the iron is still smoking, contact Weller customer support for assistance.

Here are some additional tips for troubleshooting Weller MG 130 soldering iron problems:

• Always unplug the iron when you are not using it.
• Store the iron in a cool, dry place.
• Use the correct tip for the job you are doing.
• Clean the tip of the iron regularly.
• Replace the tip of the iron when it is worn out.

If you have tried all of the above troubleshooting tips and your Weller MG 130 soldering iron is still not working properly, you should contact Weller customer support for assistance.

Weller MG 130 Manual

Weller MG 130 Fume Extraction Unit

Safety Information

• Read and understand all safety instructions before using this unit.
• Keep the unit out of reach of children and unauthorized personnel.
• Do not use the unit in an explosive or flammable atmosphere.
• Do not use the unit in a wet or humid environment.
• Do not use the unit if it is damaged or malfunctioning.
• Disconnect the unit from the power supply before performing any maintenance or cleaning.
• Do not use the unit to extract fumes from hazardous materials.
• Dispose of used filters properly.

Before Use

• Make sure the unit is properly assembled and that all of the parts are in good condition.
• Check the power cord for any damage.
• Inspect the filters for any signs of wear or damage.
• If the filters are damaged, replace them before using the unit.
• Place the unit in a well-ventilated area.
• Connect the unit to a power outlet.
• Turn on the unit and select the desired suction speed.

Troubleshooting

• If the unit does not turn on, check the power cord for any damage.
• If the unit is turned on but the fan is not running, check the fuse.
• If the fan is running but the unit is not extracting fumes, check the filters for any signs of wear or damage.
• If the unit is making strange noises, turn it off and contact Weller customer service.

Maintenance

• Inspect the filters regularly for any signs of wear or damage.
• Replace the filters every 6 months or sooner if they become clogged.
• Clean the exterior of the unit with a damp cloth.
• Do not use harsh chemicals or solvents to clean the unit.

Warranty

This unit is warranted to be free from defects in material and workmanship for a period of two years from the date of purchase. If the unit becomes defective during the warranty period, Weller will repair or replace it at no charge.

Contact Information

Weller Tools GmbH Carl-Benz-Str. 2 74354 Besigheim Germany

Phone: +49 (0) 7143 580-0 Email: [email protected] Website: https://www.weller-tools.com/

Additional Information

• The MG 130 is a fume extraction unit that is designed to remove harmful fumes from the air during soldering and other activities.
• The unit has a HEPA filter that removes 99.95% of particles from the air, including lead and other harmful metals.
• The unit also has a gas filter that removes harmful gases from the air, such as rosin and flux fumes.
• The MG 130 is easy to use and maintain. It has a simple control panel with three suction speeds and a filter change indicator.
• The unit is also safe to use. It has an ESD-safe design that prevents it from creating static electricity, which can damage sensitive electronic components.
• The MG 130 is a great way to protect your health and safety while soldering or working with other hazardous materials. It is a reliable and efficient unit that is backed by a two-year warranty.